Technical Parameters

Application
The self-priming pump is mainly used to convey materials that contain gas Therefore, it is widely applied to suck materials in various applications where the liquid level is unstable,or even the liquid level is lower than the pump inlet, or used as a return pump in the CIP system.

Spedfcation
5T-80T, 2.2KW-15KW

Material
SUS316L (In the selection of materials all parts that contact the materials such as pump body, pump cover and impeller are made of SUS316L stainless steel.) The liquid passing seal is made of EPDM.

Standards
DIN,SMS

Impeller
Split impeller

Shaft seal
The static ring of mechanical seal is composed of SUS316L steel with graphite and the dynamic ring is made of silicon carbide.

Surface Treatment
The liquid receiving part is subject to polishing treatment and other parts matte or sandblasting treatment.

M aximum inlet pressure
0.5MPa

Temperature range
-10℃ to + 120℃ (EPDM)

Motor:

1. Depending on the configuration,the pump mainly adopts “ABB” brand high-efficiency M2BAX three-phase AC motor.The pump is designed and manufactured according to IEC60034.IE60072, conforming to CE marking requirements2.The explosi on-proof motor is available to meet the needsin different applications
3. With excellent electric performance,low noise and low vibration,the motor is designed to have standard protection grade of IP 55 and insulation grade of grade F.
4.Frequency: 50Hz/60H
5. Working mode: continuous (SI)
6.Rotation speed:The standard rotati on speed of the pump is 1450r/min.

Product Performance

Model descriptions of YUY sanitary return pump:

For Example

Sanitary Return Pump
Flow: 3
Lift: 16
Motor Power: 1.5
Seal Type: Internal mechanical seal
Connection Type: Union

Technical parameters:

Equipment Diagram

CIP Equipment :